AMSOIL 5W-20 SYNTHETIC-BLEND MOTOR OIL

AMSOIL 5W-20 Synthetic-Blend Motor Oil delivers a meaningful step up from conventional oil for everyday drivers who want better protection without the cost of a full synthetic. Built with greater than 50% synthetic content, it handles the demands of modern engines, including turbocharged and direct-injected platforms, with a formulation that controls deposits, resists oil consumption and flows quickly at cold startup.

Today's engines run hotter and harder than ever. Turbochargers, tighter tolerances and longer OEM-recommended drain intervals put serious stress on motor oil. A conventional 5W-20 can break down under that kind of thermal load, leading to sludge buildup, increased oil consumption and sluggish cold-weather starts. That is exactly where a quality synthetic blend earns its place.

ALL-TEMPERATURE PROTECTION
AMSOIL Synthetic-Blend Motor Oil combines quality conventional base oils with a high dose of premium synthetic base stocks and an advanced additive package. The result is a 5W-20 that resists thickening under heat while remaining fluid in cold temperatures. Cold-cranking viscosity stays below 6,600 cP at -30°C per ASTM D5293, which means faster oil flow at startup on cold mornings in a Ford F-150 or Chevy Equinox. Quick lubrication at startup is when most engine wear occurs, and this oil gets where it needs to go without delay.

KEEPS ENGINES CLEAN
Sludge and deposit buildup rob engines of efficiency and shorten their useful life. This is a common issue in GDI engines found in vehicles like the Toyota Camry 2.5L, Honda CR-V and GM 2.5L Ecotec, where fuel dilution and carbon deposits can accelerate oil degradation. AMSOIL Synthetic-Blend Motor Oil uses a high dose of detergent and dispersant additives to suspend and remove harmful contaminants before they settle on critical surfaces. The boosted synthetic content also resists deposit formation at elevated temperatures, helping keep intake valves and piston rings cleaner over the course of the drain interval.

HELPS REDUCE OIL CONSUMPTION
Volatile oil evaporates in the combustion chamber, leading to oil consumption between changes and increased exhaust emissions. AMSOIL Synthetic-Blend Motor Oil holds NOACK volatility below 12.5% weight loss per ASTM D5800, which helps the oil stay in the crankcase where it belongs. Drivers dealing with oil consumption in high-mileage 5W-20 applications, like the Ford 3.5L EcoBoost or Chrysler Pentastar V6, may notice a measurable reduction in top-off frequency.

TURBO AND DIRECT-INJECTION COMPATIBLE
Modern turbocharged and GDI engines generate significantly more heat at the bearing surfaces of the turbocharger and in the combustion chamber. AMSOIL Synthetic-Blend Motor Oil maintains a high-temperature/high-shear viscosity greater than 2.6 cP at 150°C per ASTM D5481, preserving a protective oil film under the most demanding conditions. A flash point above 200°C (392°F) per ASTM D92 provides additional thermal stability.

SPECIFICATIONS AND COMPATIBILITY
AMSOIL 5W-20 Synthetic-Blend Motor Oil is API SP (Resource Conserving) and ILSAC GF-6A licensed. It also meets or exceeds API SN Plus, SN and earlier, along with ILSAC GF-5 and GF-4. It is suitable for applications requiring GM dexos1 Gen 3, Chrysler MS-6395 or Ford WSS-M2C960-A1 specifications. This oil is compatible with other synthetic, synthetic-blend and conventional motor oils. Aftermarket oil additives are not recommended for use with this product.

SERVICE LIFE
AMSOIL Synthetic-Blend Motor Oil is recommended for the intervals stated by the vehicle manufacturer or as indicated by the vehicle's oil-life monitoring system. Change the oil filter at every oil change.