AMSOIL HEAVY-DUTY METAL PROTECTOR

AMSOIL Heavy-Duty Metal Protector delivers serious, long-lasting corrosion defense for any exposed metal surface, from truck undercarriages to farm equipment to backyard tools. It sprays on as a liquid, displaces water on contact, and dries to a tough, amber, wax-like film that can last up to several years depending on the application and environment.

Rust and corrosion don't wait. Salt spray from winter roads eats through vehicle frames and trailer components. Moisture creeps into battery terminals, tailgate hinges, and spare tire carriers. Mower decks, snowblower housings, skid-steer attachments, and metal gates sit exposed to humidity and rain for months at a time. Standard penetrating sprays evaporate quickly and leave little behind. What you actually need is a coating that stays put and keeps working long after you've moved on to the next job.

DISPLACES WATER AND SEALS OUT MOISTURE
Most corrosion starts with trapped water. AMSOIL Heavy-Duty Metal Protector actively displaces water from metal surfaces on contact, then cures into a protective barrier that seals equipment against future water intrusion. This makes it especially effective on boat trailer grounds, battery terminals, and any connection point where moisture causes electrical resistance or surface oxidation.

PROVEN SALT SPRAY CORROSION PROTECTION
AMSOIL tested this product by treating aluminum and steel pieces on their lower halves, then placing them in a 5 percent saltwater bath for one hour per day, removing them, and allowing them to dry for 23 hours. This cycle was repeated for 10 consecutive days, simulating the kind of salt exposure vehicles and equipment face on winter roadways. The treated portions showed no signs of corrosion. The untreated portions corroded visibly. That 5 percent salt concentration is comparable to the brine solutions used on roads during winter, which makes this a practical real-world test for anyone looking for a reliable truck undercoating spray or anti-corrosion treatment for snow plows and salt-exposed equipment.

DRIES TO A DURABLE, WAX-LIKE COATING
Unlike penetrating oils that stay wet and attract dirt, Heavy-Duty Metal Protector dries to a firm, amber film. It does not wash off easily and does not wear away with casual contact. For best results, allow two hours of drying time and a full 12-hour cure. Once set, the coating provides a physical barrier against salt, humidity, and chemical corrosion on steel, iron, aluminum, brass, copper, and other metal surfaces.

SPRAYS INTO HARD-TO-REACH PLACES
The aerosol format with an included extension straw lets you reach inside frame rails, boxed sections, door hinges, and tight crevices that brushes and rollers can't access. This is what makes it practical as a DIY automotive undercoating, trailer frame protector, or corrosion preventive for enclosed structural members. Apply in a uniform, even manner for consistent coverage.

BROAD APPLICATION RANGE
This is not a single-purpose product. It works as an undercoat for trucks, trailers, and SUVs. It protects snow plow frames, mower decks and blades, snowblower components, farm machinery, forklifts, metal fences, and gates. Handheld tools stored in damp garages or sheds benefit from a quick coat before seasonal storage. If it's metal and it's exposed, this product belongs on it.

COMPATIBILITY AND USAGE NOTES
AMSOIL Heavy-Duty Metal Protector is compatible with steel, iron, aluminum, brass, copper, and other common metal surfaces. Shake well before use and clean the target area prior to application. Use AMSOIL Heavy-Duty Degreaser to remove any overspray. Available in 15 oz. spray cans. Not available in Canada.