| Product Code | Package Size | Unit of Measure |
|---|---|---|
| BPCSC-EA | 19 oz. Spray Can | Each |
| BPCSC-CA | 19 oz. Spray Can | Case of 12 |
AMSOIL Brake and Parts Cleaner is a professional-strength aerosol cleaner that strips oil, grease, brake fluid, and other contaminants from brake components and automotive parts quickly and completely, with zero residue left behind.
Brake dust, road grime, and fluid contamination build up on calipers, pads, rotors, and drums over time. That contamination causes real problems: brake squeal, chatter, uneven pad contact, and reduced stopping performance. A proper parts cleaner needs to dissolve and flush these contaminants without leaving anything behind that could compromise friction surfaces or attract new dirt.
RESIDUE-FREE CLEANING
Any film or residue left on a brake rotor or pad surface can cause noise, glazing, or inconsistent braking. AMSOIL Brake and Parts Cleaner evaporates completely after application, leaving friction surfaces clean and ready to perform. This makes it a reliable choice for brake pad bedding, caliper rebuilds, and pre-assembly cleaning where contamination-free surfaces are critical.
FAST-ACTING SOLVENT FORMULA
The chlorinated, non-flammable formula cuts through grease, oil, and brake fluid on contact. It works without requiring major disassembly, so you can clean calipers, drums, and pad assemblies while they are still partially mounted. The powerful spray stream reaches into tight areas around caliper pistons, slide pins, and backing plates where contamination tends to collect.
NO DISASSEMBLY REQUIRED
Routine brake service does not always call for a full teardown. AMSOIL Brake and Parts Cleaner lets you flush contaminants down and off components in place. The included extension straw provides precision targeting in confined spaces, which is especially useful when servicing multi-piston calipers or cleaning around ABS sensor rings on trucks, SUVs, ATVs, and side-by-sides.
VOC-FREE AND NON-FLAMMABLE
The chlorinated formula is VOC-free and non-flammable, making it suitable for use in enclosed shop environments where flammability is a concern. This is a meaningful distinction compared to many flammable brake cleaners on the market that require extra ventilation precautions and carry ignition risks near hot exhaust components or welding operations.
APPLICATIONS AND COMPATIBILITY
AMSOIL Brake and Parts Cleaner is safe to use on brake pads, calipers, drums, rotors, and other metal brake components. Test on a small area before applying to rubber, painted, or plastic surfaces. Do not apply to hot surfaces or while equipment is running. Wipe off any overspray promptly.
Available in 19-ounce spray cans. Not available in California, New Jersey, or Canada. For those regions, AMSOIL also offers a Non-Chlorinated Brake and Parts Cleaner (NCBC) in 14-ounce spray cans, available in all 50 states.
What is AMSOIL Brake and Parts Cleaner designed for and what equipment can I use it on?
AMSOIL Brake and Parts Cleaner (BPCSC) is designed for cleaning brake parts, brake pads, calipers, drums, and other automotive components. It is suitable for a wide range of equipment types including auto/light truck, motorcycle, ATV, UTV, snowmobile, marine outboard, PWC, heavy-duty on-road and off-road vehicles, agriculture equipment, and powersports applications. It quickly removes oil, grease, brake fluid, and other contaminants without requiring major disassembly.
How does AMSOIL Brake and Parts Cleaner help eliminate brake squeal and chatter?
AMSOIL Brake and Parts Cleaner leaves no residue after use, which helps eliminate brake squeal and chatter caused by contaminant buildup on brake components. By thoroughly removing oil, grease, and brake fluid from pads, calipers, and drums, it restores clean metal-to-metal contact surfaces that are essential for quiet, consistent brake performance. The formula also dries quickly, so cleaned parts are ready for reassembly without delay.
Is AMSOIL Brake and Parts Cleaner a chlorinated or non-chlorinated formula and is it flammable?
AMSOIL Brake and Parts Cleaner uses a chlorinated, non-flammable formula. It is also VOC-free (volatile organic compound-free), which differentiates it from many competing brake cleaners on the market. It is available in 19-ounce spray cans and includes an extension straw for precision application.
How does AMSOIL Brake and Parts Cleaner compare to other brake cleaners that leave residue?
Unlike many brake cleaners that can leave behind a film or residue, AMSOIL Brake and Parts Cleaner is specifically formulated to leave no residue after application. Verified buyers have noted its powerful spray stream that blasts off stubborn crud, its lack of residue, and the absence of a strong chemical stench in enclosed spaces like garages. Its chlorinated, non-flammable, and VOC-free formula also sets it apart from flammable or high-VOC alternatives.
How do I properly use AMSOIL Brake and Parts Cleaner on my brakes?
Shake the can well before use, then spray starting at the top of the brake assembly to wash contaminants down and off the area. For extremely contaminated parts, repeat the application. Use the included extension straw for precision application in tight spots. Do not apply while equipment is running or to hot surfaces, and be sure to wipe off any overspray. Always test on a small area before using on rubber, painted, or plastic surfaces.
Is AMSOIL Brake and Parts Cleaner safe for rubber, painted, or plastic surfaces?
AMSOIL recommends testing the Brake and Parts Cleaner on a small area before using it on rubber, painted, or plastic surfaces. The product is designed primarily for metal brake components such as pads, calipers, and drums. Any overspray on surrounding surfaces should be wiped off promptly. It is not available in California, New Jersey, or Canada due to regional regulations.
Product Details PDF - AMSOIL BRAKE AND PARTS CLEANER
